Jump to content
HybridZ

lex240zls1

Members
  • Posts

    42
  • Joined

  • Last visited

Everything posted by lex240zls1

  1. 4x108mm or 4x4.25 to our 4x4.5 or 4.114.3 adapters are $300.00 + the ride I'll try to check how long on build time . I think they have them down to 25.4mm thick
  2. lex240zls1

    Rear Left

    sweet wheel combo!!!!
  3. It's an uncommon way to make a combo fit due to its complexity OF INSTALL, $ and liability. Im not to crazy about how the 4 TO 5 LUG ADAPTER BECOMES A TWO Piece PRODUCT.THIS MAKES THE ADAPTOR 2X THICK that could be up to 2.5" to 4.0" , but I will check the thickness of the 4to5 lug adapters to see if it would work with your ideal drift r combo to be functional in all aspects of safty and then style . I can't stand seeing wheels sticking way in or posting way out it must be flush within the fender.
  4. WCA7 THE WHEELS ARE ROH MODENA 19X8 FRONT 19X9.5 REAR. NOTHING FITS LIKE A 3-piece modular wheel. IF YOU HAVE ANY QUESTIONS ON WHEELS I MAY BE ABLE TO HELP. THANKS FOR THE NICE COMMENT ,GOOD LUCK ON YOURS
  5. STILL REFINING THE INDUCTION SYSTEM . {I PLACED THE FILTER EVEN WITH THE BACK OF THE BUMPER} I PLAN TO PROTECT THEM ALUMINUM BOX .
  6. ROH DRIFT R , sweet wheel we just finished stagered 18x9 18x7.5 combo on a 944 , but I don't think they have our aplication, I don't know how u feel about adapters . I've been skeptical of them over the years. I have been in the wheel business for over 11 years and had to sell them for certain application because if I would not the next competitor would. My family has been in the wheel & tire game since 1972{32years} . In my 11 years I've sold thousands and never had a problem with a single one. The combo consist of 4 super strong custom built on order from cold forged billet aluminum hub centric adapters or spacers in this option of fitment that happen's to be so easy. I didn't use them on my application because I went with a custom build wheel that was a direct fit. This is the best way for fitment!!!! I also paid out my ass for my combo!!! so I'll check a price and length of build time so you could compare it to a 5 lug convertion or a custom built wheel.
  7. Kaminary 3 hole w a modifed fiberglass bumper
  8. I have to say the sales women at sanderson did an Excellent job . I just wish they would put her in the box with the header's so when I open them up she could pop out and install them. This is not one of those over night conversion. It fills like it has taken life time.
  9. Thanks for the info everybody, this forum rocks! I will give JTR a call in 3 weeks. 8)
  10. I used a Sanderson sweep back block hugger 1 1/2 on the driver side. All I had to do was beat the (%*#@) out of it . The passenger side is a bad dream of frame, oil pan , starter , that bushing housing box on frame. thanks to sanderson for pushing me in this direction even when I asked about the custom headers.
  11. I am runing 98 vette LS1 , It has the hammer head style oil pan . It 's given me great clearance under the car with the JCI kit I would say about an inch above the crossmember , But the hammer head shaped oil pan has a wing that sweeps dead below the center the 4 exhaust ports. Has any one out there come contact with this super tight fitment? PLEASE HELP I AM SO CLOSE
  12. The car is a 20mm offset car . So will a 30mm wheel fit ? somtimes yes because how the of back wheels spoke could roll out of the way brakes. but it still looks funny because the wheel post about 1/4 '' inside the fender . It sure can make the wheels looks narow posting in like that. good luck. TEST FIT
×
×
  • Create New...