Search the Community
Showing results for tags 'triples'.
Found 6 results
-
Looking for a set of triples. Whether full package or just parts. I’ve found a few sets on eBay, Redline being one of them, and those are a little out of my budget right now. Just curious what else is out there. Thanks, -Dean
-
So with fall right around the corner, I'm preparing another small, and maybe final batch of Mikuni/Solex carb hoodies. This is a very small batch, with only 5 available in each size. The hoodies are made by Gildan, here are the specs: 8.0-ounce, 50/50 cotton/poly; no pill Air Jet Spun Yarn Double-needle stitching Double-lined hood with dyed-to-match drawcord Set-in sleeves Rib knit cuffs and waistband with spandex Front pouch pocket The hoodies will be ready to ship the second week of September. Typical price is $30, pre-order group buy price is $24.99! You can pre-order via hybrid-z or directly through the store.
-
Hey guys, I got something out of the blue and hoping a random angel-sent individual will have some sort of assistance for me. I recently installed triple Dellorto dhla 40's on my engine via an SK manifold. The engine specs as follows: stock l28 bottom end with the exception of flat top pistons. The head is a rebuilt N42 head with a mild Rebello cam. The carbs have 38mm choke, 132 mains, 33 pump jets, 7772.8 emulsion tube, 210 air correctors, and 58 Idle jets. I should note that the engine ran with SU's (SU's were replaced with triples due to leaking throttle shaft) Replaced parts: plug wires, ngk bpr6es plugs, carbs were resealed, also rechecked all bolts With that out of the way, I am having much difficulty keeping the engine idling. I have tried backing out the Idle mixture screws 3.5 turns through 6 turns, and it still won't idle. If i give it a couple pumps, it will idle only for a second. I have checked for vacuum leaks but can't find any. I can keep it alive by giving it gas, which means its somehow not rich enough at idle. The idle jets seem pretty big, so is it just a simple vacuum leak that I am somehow missing, or is it something else?
-
Hey all, I have triple Dellorto dhla's,but I had to switch the top cover on one due to the person I purchased them from failing to notify me of a broken float pin arm. Anyhow, I switched everything over except I can't figure out how to swap over the fuel enrichment device. I removed the nut holding on the linkage, and the cap on top as well as the spring that presses on the piston, but I can get out that piston or the arm where the linkage slides on. If anybody has any idea how to switch this over I'd greatly appreciate it. I know that they don't need to be used, but I do need to have it there on the new top cover. Thanks for any help.
-
Doing a slow restore on a 72 240 i picked up. Weber 45s were having some trouble sneezing and leaking so took them off to clean em up and replace gaskets, set floats etc. Noticed these adjustment screws which i find no mention of in Haynes manual, or any online reference ive found. These are the later 152s with nitrophyl/spansil floats so im thinking it was a modification on later models? has a white plastic hat/cover. one on each throat. with plastic cover removed needle screw with fastener nut needle pokes through main venturu/choke into carb throat (upper right)
-
Looking to buy a set of 3 matched Mikuni phh 44 carbs. Doesn't bother me if they are type S4 or S5. Either type will suit me and my needs. If seller has manifold as well this will be great. Pm me or email at onemorekay@gmail.com
