Marc280 Posted June 16, 2011 Share Posted June 16, 2011 I need to remove the windscreen to be able to fix some rust that is eating it's way back under the windscreen sealing. In the factory service manual, it says to just remove the pillar windscreen moulding. This might seem like a bit of a stupid question, but I can't seem to work out how to remove them. The top an bottom ones were easy enough to remove, but I can't get the pillar ones off. I searched but didn't come up with anything, so maybe I'm just a little slow in working this out If anyone can give me some tips or hints, that would be great! Quote Link to comment Share on other sites More sharing options...
BluDestiny Posted June 16, 2011 Share Posted June 16, 2011 The pillars are screwed in underneath the door weatherstrip/moldings. Quote Link to comment Share on other sites More sharing options...
autojumbled Posted June 17, 2011 Share Posted June 17, 2011 Pop out the door rubber weather strip on the A pillar - there are 3 screws holding in the mouldings Quote Link to comment Share on other sites More sharing options...
Marc280 Posted June 23, 2011 Author Share Posted June 23, 2011 Thanks for the replies, that made it a little easier! I wasn't expecting that to all be one piece.... Unfortunately after pulling back the weatherstripping I found this on the pillar which made getting everything off pretty tricky. There wasn't too much rust actually on the pillar under the trim, however around the around the T-Tops there is a litte more... It might not look too bad in the photos but I stripped them back and some of the spots have holed right through, so it looks like I'll be doing some rust repairs a little sooner than planned... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.