3ftyZ Posted February 24, 2012 Share Posted February 24, 2012 Hey all, I installed my R200 CLSD last weekend and came across a small predicament. The bolts i purchased to mate the drive-shaft to the pinion flange are too big! I used the Drive Shaft Adapter Flange from: http://www.jagsthatrun.com/Pages/Parts_DAT_driveshaft_flange.html Specifically, the adapter for 300ZX (part number #DAT-110-300ZX) I purchased 4 10mm x30mm socket cap bolts, but the head diameter is too large and there's no sleeve/shoulder. What I cant find is either the original bolts from Nissan for the 88 300zx turbo that the R200 came out of, or a similar replacement. This is the closest I can find, but the head diameter is grater than 14mm, which is what I measured for head diameter: http://www.boltdepot.com/Product-Details.aspx?product=14077 any ideas on how I can find the right fasteners? Thanks! 3ftyZ Quote Link to comment Share on other sites More sharing options...
rossman Posted February 24, 2012 Share Posted February 24, 2012 Purchase a set from Courtesy Nissan. Quote Link to comment Share on other sites More sharing options...
3ftyZ Posted February 25, 2012 Author Share Posted February 25, 2012 Purchase a set from Courtesy Nissan. Oh! wow, I think this is it! http://www.courtesyparts.com/300zx-parts-z31-1984-1989/genuine-nissan-parts/power-train/370-propeller-shaft/-c-2317_2318_2391_2409.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.