Jump to content
HybridZ

Fuel Pump Good. Ground Good. Relay Good. Positive cable not energizing???


MazerRackham

Recommended Posts

So my fuel pump isn't running and I have no idea why! I removed my fuel pump and tested it with a 12v battery. It sprayed gas in my face so I'm pretty sure it works. I tested for continuity in the circuit by hooking up a really really long piece of 18 gauge wire to the battery terminal and testing from there. I obviously did both positive and negative currents. What I found was this. The ground for the fuel pump is good. The relay for the fuel pump is good. But when I open the flapper for the AFM and test the positive cable for the fuel pump there is no positive current running through it.

Edited by MazerRackham
Link to comment
Share on other sites

I stopped watching your video when I saw that it was six minutes long and you started talking about your house. Words are good. Did your fuel pump stop working?

 

Don't forget the FSM. It's more specific to your car than the EFI bible.

Link to comment
Share on other sites

Yeah, the OP doesn't clearly state a question and a minute of two of the video doesn't elucidate either.

 

Off the top of my head, if you have positive voltage on a ground circuit, check if that red battery wire isn't going to the negative post.

 

"Postive cable not energizing?"

 

Oy.

 

:facepalm

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...