Kash Posted August 23, 2012 Share Posted August 23, 2012 Will the L24 rods fit the RB26dett pistons with no modification? Per the engine calculator, the piston end bores are the same (21) but the piston end thicknesses are different between the L24 rods (25.4) and the RB rods (21.8). Not certain what the piston end thickness is…is this the piston clearance needed to fit the rods? If so, I will assume that the L24 rods would not fit the RB26 pistons. Can anyone confirm or deny? Lost my oversized (89mm) block to cracks so now I need a set of 86mm turbo pistons to reassemble with my LD28 crank and stock block...the OEM turbo pistons won't work, they will be protruding 2mm above deck with the stroker crank. If this is a go I will be needing a set of used OEM RB26 turbo pistons, if anyone has a set for sale or can send me one for testing, I would apreciate (I will pay for shipping both ways). Thanks. Quote Link to comment Share on other sites More sharing options...
datsun45 Posted August 30, 2012 Share Posted August 30, 2012 What modifications are req'd to use the LD series crank in the RB ? Quote Link to comment Share on other sites More sharing options...
BluDestiny Posted August 30, 2012 Share Posted August 30, 2012 He's not using an RB block, just the pistons. He's still using an L28 block with an LD28 crank. Quote Link to comment Share on other sites More sharing options...
Kash Posted September 1, 2012 Author Share Posted September 1, 2012 He's not using an RB block, just the pistons. He's still using an L28 block with an LD28 crank. That's correct... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.