JIM73240Z Posted March 31, 2013 Share Posted March 31, 2013 I am currently building the MSII V 3.0 and when installing the jumpers for the ignition section, does it matter what side of the diode it goes on/ jimbo Quote Link to comment Share on other sites More sharing options...
motomanmike Posted April 1, 2013 Share Posted April 1, 2013 You'll have to be specific and maybe post a picture so we can help you, at the very least let us know which marks on the board you are referring too. Pretty much everything with MS has a specific place to solder each lead or will tell you in the manual if polarity doesn't or does matter. The steps you are doing depend alot on what you are doing with ignition too. Quote Link to comment Share on other sites More sharing options...
JIM73240Z Posted April 7, 2013 Author Share Posted April 7, 2013 in the build manual, for triggering off of a hall optic circuit, it says to jumper d1 and d2. is this just a piece of wire to complete the circuit in lieu of the diode. step 50 a. section v & vi. jimbo Quote Link to comment Share on other sites More sharing options...
OhBilly Posted April 8, 2013 Share Posted April 8, 2013 Yes, jumpers are just pieces of wire used in lieu of the component. It's usually convenient to just used a snipped-off piece of wire from a resistor or other component. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.