xonix_digital Posted April 19, 2013 Share Posted April 19, 2013 I am currently running my brake lines and do not have the original rubber brake line insulators that fit into the clips pictured. Can anyone help me find these online or a suitable substitute? I searched the site and didn't find anything relevant. Im looking for the ones that go into the engine bay. Thanks. Quote Link to comment Share on other sites More sharing options...
nix240z Posted April 19, 2013 Share Posted April 19, 2013 (edited) those are mine that I make...I have the complete sets for the 70-73 240z. steve Each 240z fuel and brake line insulator was reproduced in a urethane plastic on a milling machine, which made for a very high quality master insulator. Each insulator is then cast in a two part high quality silicone mold. The insulators are cast in a urethane rubber with a shore hardness of 70A. The urethane has been degassed in a vacuum chamber, then cast and cured in a pressure pot for 24hrs. After curing for 24hrs the insulator have been heated to 150deg for 8 hrs for post-curing. It takes two day to make one complete set of insulators. 70-72 has 15 large insulators, 6 brake line insulators and 4 flow guide valve insulators. 73 have 14 large insulators, 6 brake line insulators and 4 flow guide valve insulators. Edited April 19, 2013 by nix240z Quote Link to comment Share on other sites More sharing options...
xonix_digital Posted April 19, 2013 Author Share Posted April 19, 2013 Nice! I dont need a whole set but how much are they? Any chance I could just get two or three of them? Quote Link to comment Share on other sites More sharing options...
nix240z Posted April 19, 2013 Share Posted April 19, 2013 (edited) Nice! I dont need a whole set but how much are they? Any chance I could just get two or three of them? Complete set of 25 insulators is $150 plus $6 shipping inside the US for only a few sets then norm at zeddsaver.com will be selling the sets at $170 plus shipping. there are 2 smaller type insulators for the brake lines and flow guide valve that is not shown on the picture you posted. Send me a Pm on the insulators you need... I will see what I can do, I have samples and blems. I do have some blems that once installed on the car, the blem will not be seen. Steve Edited April 19, 2013 by nix240z Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.