milesz Posted June 2, 2013 Share Posted June 2, 2013 I have a 73 240z and I have no trun signal. My hazard light in the rear and on the front driver side works. But no turn signal. I changed the flasher and still no turn signal. I also checked the flasher wiring harness and the green wire is getting power to the flasher but the white wire is not send a signal out to the lights. Need a little help Thanks Quote Link to comment Share on other sites More sharing options...
rsicard Posted June 2, 2013 Share Posted June 2, 2013 Likely the turn signal switch needs to be repaired. Go to classicz Internet Site and go to the electrical section. There is a fellow in Washington state that repairs those switches. Make certain that the wiring has not been tampered with. Let us know how you make out. Quote Link to comment Share on other sites More sharing options...
milesz Posted June 3, 2013 Author Share Posted June 3, 2013 I have a 73 240z and I have no trun signal. My hazard light in the rear and on the front driver side works. But no turn signal. I changed the flasher and still no turn signal. I also checked the flasher wiring harness and the green wire is getting power to the flasher but the white wire is not send a signal out to the lights. Need a little help Thanks Now, all the hazard lights work ( changed the bulbs). I still do not have turn signals. I also replaced the turn signal switch but no change. Quote Link to comment Share on other sites More sharing options...
T-Bone028 Posted June 3, 2013 Share Posted June 3, 2013 Check the turn signal sockets themselves. Quote Link to comment Share on other sites More sharing options...
morbias Posted June 3, 2013 Share Posted June 3, 2013 (edited) Check the hazard switch, the turn signal wiring goes through that Edited June 3, 2013 by morbias Quote Link to comment Share on other sites More sharing options...
milesz Posted June 4, 2013 Author Share Posted June 4, 2013 Check the hazard switch, the turn signal wiring goes through that All my hazard works. I checked the flasher connection and the green wire is getting power but the white wire sending no signal at all. Quote Link to comment Share on other sites More sharing options...
steve260z Posted January 7, 2014 Share Posted January 7, 2014 I have the same problem......Power to the green wire. Did you ever find the problem? Quote Link to comment Share on other sites More sharing options...
Trentomobol Posted January 7, 2014 Share Posted January 7, 2014 All my hazard works. I checked the flasher connection and the green wire is getting power but the white wire sending no signal at all. Yes, but the hazard switch could have corrosion on the turn signal side Check the fuse and then if fuse is alright, take your hazard switch off and clean the contact points in it with some baking soda mixed with warm water. Let it dry before reassembling and try it out. Quote Link to comment Share on other sites More sharing options...
steve260z Posted January 11, 2014 Share Posted January 11, 2014 (edited) HA!!! Took apart my hazard switch. Brushed the circuit board and contacts with warm water and baking soda. Turn signals are now working. Thanks!!! ss Edited January 11, 2014 by steve260z Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.