EF Ian Posted February 15, 2014 Share Posted February 15, 2014 I recently fitted the AZC Wilwood setup to my 260Z, the setup is working great and stops really quickly but I am getting really bad squeal as the car comes to a stop. I put a load of copper grease around the pads but it made no difference. I'm using Hawk HP+ pads but it also does it with the Wilwood Pads. Anybody else had this problem and does anyone know of a solution? Quote Link to comment Share on other sites More sharing options...
Nigel Posted February 15, 2014 Share Posted February 15, 2014 I only used silicon brake lube on the sliders and the pistons and I don't have any issues with squealing. I'm using the Wilwood pads. Did you follow the bed-in procedure? Nigel Quote Link to comment Share on other sites More sharing options...
EF Ian Posted February 15, 2014 Author Share Posted February 15, 2014 There was silicon brake lube on the pads, I removed that and tried copper slip, but it was the same with both. I bedded them in same as I always have with all my brakes so it was definitely done correctly. Quote Link to comment Share on other sites More sharing options...
Pharaohabq Posted February 17, 2014 Share Posted February 17, 2014 Call Wilwood. They'll probably have some input. Maybe there's a shim or something that's out of place. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.