skully Posted May 31, 2014 Share Posted May 31, 2014 Ordered a Tilton 75 TIL-75-875U and there's no way it will fit. the diameter of the C MC will rub on the 8.5 MC. Running a T56 and Wilwood 6/4 on the Z. Anyone else have this problem? Ideas? Seems like I would need a 8" or smaller MC or alternate Clutch MC than the recommended Tilton 75 series... ugh Quote Link to comment Share on other sites More sharing options...
Miles Posted May 31, 2014 Share Posted May 31, 2014 Check out Wilwood clutch MCs. They may be more compact. Quote Link to comment Share on other sites More sharing options...
RebekahsZ Posted June 1, 2014 Share Posted June 1, 2014 Neither component has any exterior mechanical function, so it's ok to let them touch. If it is still too close to bolt up, just slot the mounting holes and slide it over a 1/8". There should be enough slop in the clevis to allow it to function properly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.