Black_Out_280Z Posted July 31, 2014 Share Posted July 31, 2014 I can't find connector to the ignition module on the ecu can someone help please Quote Link to comment Share on other sites More sharing options...
NewZed Posted July 31, 2014 Share Posted July 31, 2014 The ignition module is not on the ECU, it's by the fusebox. Above and forward. http://www.nicoclub.com/FSM/280z/ Quote Link to comment Share on other sites More sharing options...
Black_Out_280Z Posted July 31, 2014 Author Share Posted July 31, 2014 It's for a turbo Quote Link to comment Share on other sites More sharing options...
NewZed Posted July 31, 2014 Share Posted July 31, 2014 It's still in the link I provided. Do some work. Check the coil bracket for a silver cylinder. Then open the EFEC chapter to figure out what it is. Quote Link to comment Share on other sites More sharing options...
Black_Out_280Z Posted July 31, 2014 Author Share Posted July 31, 2014 Ok so the wires never were on the ecu ? Quote Link to comment Share on other sites More sharing options...
NewZed Posted July 31, 2014 Share Posted July 31, 2014 You might find some diagrams in this sub-forum, or the answer directly - http://forums.hybridz.org/forum/90-l-series/ The turbo ECCS system is hard to work on. Nissan built an analyzer for it and therefore didn't put much in to the later Service Manuals. The 1981 Turbo Supplement has a good wiring diagram. Try that one. http://www.xenons130.com/reference.html If you're on a phone and can't open big documents, you'll just have to ask better questions or hope someone feels generous. Good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.