az240z Posted August 4, 2015 Share Posted August 4, 2015 So the breather tube on the block broke and there is about 1/2" of the tube in the hole. What is the best way to get it out? Is it pressed in?? Is using a thin bladed screw driver to bend it inward the best way to go?? I went to ace looking for a tap or reverse screw but they didn't have anything big enough as Its approx 7/8" wide. Quote Link to comment Share on other sites More sharing options...
gnosez Posted August 4, 2015 Share Posted August 4, 2015 It's pressed in and with care you can pry it out. Get one from another engine, or carefully tap out the hole so it takes an NPT pipe. Quote Link to comment Share on other sites More sharing options...
az240z Posted August 9, 2015 Author Share Posted August 9, 2015 I got it back in using anti seize, dry ice and rubbing alcohol.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.