milesz Posted September 17, 2015 Share Posted September 17, 2015 I have a 240z and trying to install the Pivot Illumi Starter. I know the red wire goes to the red/ white wire (12v power); the black wire is ground; one blue wire I hooked to the black/yellow wire and the other blue wire I have hooked to the black/blue wire. When I turn the key to the on position, the switch does does illuminate. It illuminates when I press it but it will not start the car. What did I do wrong? Link to comment Share on other sites More sharing options...
Datsun#1 Posted January 8, 2016 Share Posted January 8, 2016 Negative wire going to starter Link to comment Share on other sites More sharing options...
Recommended Posts