Jump to content
HybridZ
milesz

Push Button Strater

Recommended Posts

I have a 240z and trying to install the Pivot Illumi  Starter.  I know the red wire goes to the red/ white wire (12v power); the black wire is ground;  one blue wire I hooked to the black/yellow wire and the other blue wire I have hooked to the black/blue wire.   When I turn the key to the on position, the switch does does illuminate.  It illuminates when I press it but it will not start the car.

 

What did I do wrong?

Share this post


Link to post
Share on other sites

×
×
  • Create New...