FairladyGTR Posted January 19, 2020 Share Posted January 19, 2020 Hey guys... I'm trying to remove the driveshaft on my 74' 260Z and the damn thing just won't turn... i have it in neutral and it just won't turn... like something is seized up....? I got 2 of the bolts out but I cannot turn it to get the other 2 out to drop the drive shaft. Any ideas...? Quote Link to comment Share on other sites More sharing options...
Whitley_280z_2+2 Posted January 19, 2020 Share Posted January 19, 2020 Are the rear wheels off the ground and the parking break released?. Quote Link to comment Share on other sites More sharing options...
FairladyGTR Posted January 19, 2020 Author Share Posted January 19, 2020 Rear wheels are off the ground and the parking brake line is disconnected at the brake handle....? Am i missing something in the rear on the e-brake..? Quote Link to comment Share on other sites More sharing options...
pamato Posted January 19, 2020 Share Posted January 19, 2020 can you turn the rear wheels by hand? If not then the rear drums might be seized to the shoes. Quote Link to comment Share on other sites More sharing options...
FairladyGTR Posted January 27, 2020 Author Share Posted January 27, 2020 I ended up getting it! I kept trying to spin the left rear and it would not budge...but the right turned and I was able to get it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.