Jump to content
HybridZ

100% Injector dead time vs Voltage


Recommended Posts

I have recorded my voltage levels with the car at idle at (800 - 900) RPM with the electronic fans on. And the electric fans off.

Here are my results.

 

Fans not running

At about 900 RPM (14.10 - 14.20) Volts.

 

Fans running

At about 850 - 900 RPM (13.90 - 14.00) Volts.

 

My injector dead time is currently set to 1.500 (Ms).

Here is a picture of the stock curve values set by tunerstudio.

 

Stock Curve

 

Would it not make sense to have the injector Dead Time running at 100% during this voltage swing?

Here is a picture of the new voltage curve, which is more or less a flat line between these two voltages. 

 

Modified

 

 

 

Edited by 79er
Link to post
Share on other sites
33 minutes ago, 79er said:

Thank you for clarifying that up. This is my current tune with a bit of testing involved. At these settings my VE table at Idle is able to achieve in the range of 20 - 30 Fuel load.

Is this table a bit more suitable, more practical?

 

Current Values

Sure, if that's what your testing shows. Really all you're looking for is that the AFR/Lambda doesn't change at idle with the fans on and off, with the lights on and off. etc.  As long as your fuelling remains pretty constant across all the different voltages that your car is likely to see then I wouldn't worry to much about the out extremes of the dead time table. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...