FastFloridian Posted November 12 Share Posted November 12 I Recently purchased a 1972 240Z. I have a Twin Turbo 370Z that I track occasionally, and that car is amazing, and I've done everything I wanted to do with it. I wanted a new project, and thought it would be great to build the OG Z, the 240Z. 240Zs in decent shape have gotten pretty expensive, so to fit with my budget/cash flow, I started looking at ones that needed some work and I found a purchased one right as Hurricane Milton was barreling towards us. I had to keep her outside during the hurricane, but she survived. My plan is to make a dedicated track car. I spent some time making by build list before I bought the car, and the more I dug in the more I wanted to do, and the more the build costs were going up. My timeframe is a realistic 1-2 years, so at least I can spread out the costs of parts over time. I'm mechanically inclined and did everything on my 370Z myself, but I'll be tackling a lot more on this build and will be learning a lot as I go. I've got my Dad helping too, so this will be a fun project together. So this is what I have, 1972 Datsun 240Z that has already been modified for the track somewhat. It has a full rollcage, fuel cell and a Ford carbureted 302 motor. The car runs, but the brakes seem shot and the only gauge that works is the tachometer. Lots of wiring inside and for the motor are pretty shotty, so she needs a lot of TLC. Below are my plans so far, we'll see how far down the rabbit hole I go. Purchased or Ordered So Far Apex Track Attack Front Suspension Kit Ztrix IMSA body kit with fender vents, custom front bumper and origin dash ZPowerSteering Electric Steering Kit Fuel Lines, filters and Pressure Regulator for a fuel return system Planning to Order Soon (Black Friday Deals) Big Brake Kit - Possibly 6 piston front and 4 piston rear Holley Sniper 2 EFI kit Holley EFI 12.3" Digital Guage and various sensors Heads and Cams Rest of Build Apex Track Attack Rear Wavetrac LSD Rear Wing Front Splitter Wheels and Tires Quote Link to comment Share on other sites More sharing options...
FastFloridian Posted November 12 Author Share Posted November 12 Quote Link to comment Share on other sites More sharing options...
FastFloridian Posted November 12 Author Share Posted November 12 I started the tear down last weekend, got the fluids drained, hood and bumper off and got the radiator out. I’m hoping to get the motor ready pull by next weekend and hopefully have the motor out by Thanksgiving. Quote Link to comment Share on other sites More sharing options...
armorer Posted November 16 Share Posted November 16 Car has some uh, interesting body mods! Always great to see another build starting. Quote Link to comment Share on other sites More sharing options...
FastFloridian Posted November 16 Author Share Posted November 16 (edited) Got the fenders and cowl off, everything underneath looks pretty good, just a little surface rust. Header bolts were coming off pretty easy, I sprayed them with pb blaster a few times during the week, did the trick. A couple were hex bolts for some reason. Hopefully work on it a little bit tomorrow too, would like to get exhaust and headers off, and maybe the drive shaft. Ordered a few parts too, front strut brace, fender brace, master cylinder brace and a new steering rack from Apex. Hopefully my electric power steering kit will be ready to pick up next week. Edited November 17 by FastFloridian Quote Link to comment Share on other sites More sharing options...
FastFloridian Posted November 17 Author Share Posted November 17 Snuck out to the garage for a few minutes. Didn’t get much done, removed fan and shroud, and just planned out the next few steps. Got a good look how the fuel system was set up, I’m replacing everything, but at least I got a good look at the old set up, pump connections at fuel cell etc. Quote Link to comment Share on other sites More sharing options...
FastFloridian Posted November 19 Author Share Posted November 19 Electric power steering kit was ready today. They are local, so I just picked it up. 1 Quote Link to comment Share on other sites More sharing options...
FastFloridian Posted November 19 Author Share Posted November 19 Just got an update from John on my bumper, almost done 1 Quote Link to comment Share on other sites More sharing options...
FastFloridian Posted November 27 Author Share Posted November 27 Ordered my first Black Friday deal, got the Holley sniper 2 and digital dash to make it EFI. Got some sensors too so I can read everything on the dash, AFR, rpm, speed, oil temp, oil pressure, fuel pressure, coolant temp and probably a few other things. Currently only tachometer and oil pressure work. Still need a fuel level sensor, but my fuel cell has the connections for it. Might get brakes and top end kit and maybe stuff to make oil cooler on Friday depending on the deals. Ordered from EFI pro systems, they were super helpful and saved me a few bucs. I was leaning toward a more expensive system and unless I was using a power adder it didn’t really add anything, saved me $800. I heard they have good tech support for install trouble shooting too Quote Link to comment Share on other sites More sharing options...
FastFloridian Posted November 29 Author Share Posted November 29 Got the rest of my Black Friday shopping done for the Z. I got a twisted wedge top end kit, rpm air gap intake, a steering wheel and quick release hub and some 6-Piston 370Z brakes. All good deals. Money is all spent time to build it. 1 Quote Link to comment Share on other sites More sharing options...
FastFloridian Posted Saturday at 09:55 PM Author Share Posted Saturday at 09:55 PM Got the headers and exhaust off. Header to exhaust bolts were a PIA, but finally got them. Driveshaft is next and then a few small things here and there and I should be ready to pull the engine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.