jzd14 Posted March 20, 2003 Share Posted March 20, 2003 i have a 240z with aftermarket springs and it's really low i want to keep the springs i have but raise the car up a bit i think i have heard before of some sort of spacers that came on the 280z near the top of the shock tower that can be used on the 240z does anyone know anything about this or have any other ideas of what i can do to raise my car up a little i don't need to much more height, just enough to stop scraping the exhaust pipe thx Quote Link to comment Share on other sites More sharing options...
Two40MuscleZ Posted March 20, 2003 Share Posted March 20, 2003 Last Nov I purchased Lone in AZ's unfinished project Z, who also lives in Mesa. He had added several spacers to the front and rear springs to keep it from bottoming out. Concept marginal...ride stiff. My advice; only use them as a last resort. Mikelly, Pete Paraska and/or BlueOvalZ can most likely direct you in the best direction. Comps, VAN Quote Link to comment Share on other sites More sharing options...
Modern Motorsports Ltd Posted March 20, 2003 Share Posted March 20, 2003 It wouldn't be a big deal to make a simple spacer to use at the top of your strut like a bolt on adaptor to increase the top mount thickness....take a bit of work but if you truly like your springs it would suit your needs. Quote Link to comment Share on other sites More sharing options...
auxilary Posted March 20, 2003 Share Posted March 20, 2003 76-78 280z shock tower mounts were about 1/2" to 3/4" taller than 240z ones, so you could use those instead of stock 240z ones. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.