Georgia Flash Posted March 23, 2003 Share Posted March 23, 2003 Hello guys, most of you are probably watching Bristle right now but here goes. Anyone out there that has the factory shop manual for the 75 Z tell me what the torque is for the R-200 cover bolts. I am putting mine back togeher and need to know asap. Also I have a new gasket would you guys use RTV and the gasket or maybe just the gasket? Let me know fellas. Thanks Quote Link to comment Share on other sites More sharing options...
Tim240z Posted March 23, 2003 Share Posted March 23, 2003 Actually watching Indy while waiting for fiberglass filler to set up.... Here you go: 16-24Nm, 1.6-2.4 kg/m, or 12-17 ft/lb. I've never had much luck with gaskets back there. Either use the gasket with a LITTLE hylomar, or just use silicon. Tim Quote Link to comment Share on other sites More sharing options...
Georgia Flash Posted March 23, 2003 Author Share Posted March 23, 2003 Thanks Tim, Man that Kurt Bush is one hell of a race car driver!! I think I will use a little silicone and the gasket on the cover, thanks for the torque specs. I have the R-200 painted bright ford engine blue along with the half shafts and the cover is painted with an aluminum wheel paint. Of course all of that is covered in a couple of layers of clear coat. Yep I know, no one will ever see this handy dandy paint job but I will know it's there Quote Link to comment Share on other sites More sharing options...
Georgia Flash Posted March 24, 2003 Author Share Posted March 24, 2003 Pic of the new Ford Blue on the R-200 and new rear cover! http://www.imagestation.com/picture/sraid56/p30d73199a902c047b44c91c5f66d0ea9/fc741aff.jpg.orig.jpg Quote Link to comment Share on other sites More sharing options...
Georgia Flash Posted March 24, 2003 Author Share Posted March 24, 2003 More eye Candy http://www.imagestation.com/picture/sraid56/p50aefdbf008aa2c68be585c04a379325/fc741b05.jpg.orig.jpg Quote Link to comment Share on other sites More sharing options...
Tim240z Posted March 24, 2003 Share Posted March 24, 2003 I see nothin' Quote Link to comment Share on other sites More sharing options...
ToplessZ Posted March 24, 2003 Share Posted March 24, 2003 hey dont be such a tease I wanna see that picture.... Quote Link to comment Share on other sites More sharing options...
Georgia Flash Posted March 24, 2003 Author Share Posted March 24, 2003 Guys I can see it fine on both posts. Why can't you see it??? I also have them on the yahoo web site just click on my www button and you should be able to access it. Now I am wondering why the pic isn't visable to anyone else. Quote Link to comment Share on other sites More sharing options...
Mudge Posted March 24, 2003 Share Posted March 24, 2003 Georgia, probably because it requires authentication/login. I see nada and am on high speed internet. YahooFS (file share) requires authentication, or to be setup for open viewing, and I think you need to provide a link I dont think IMG URL mapping works from thier servers but I dont recall. Many hosts block remote viewing, unless your paying for a website/service etc I use RTV in tons of places and have zero problems with it, just make sure the surface is clean! Quote Link to comment Share on other sites More sharing options...
Guest Your Car is Slow Posted March 24, 2003 Share Posted March 24, 2003 I dont see it either...and no red Xs...still shows the page is loading to me....very odd :/ As for RTV...that stuff is a godsend...only thing I can think of more useful than that is zipties Quote Link to comment Share on other sites More sharing options...
Georgia Flash Posted March 24, 2003 Author Share Posted March 24, 2003 Thanks Tim Quote Link to comment Share on other sites More sharing options...
Georgia Flash Posted March 24, 2003 Author Share Posted March 24, 2003 Thanks Quote Link to comment Share on other sites More sharing options...
Tim240z Posted March 24, 2003 Share Posted March 24, 2003 There ya go!! Quote Link to comment Share on other sites More sharing options...
Georgia Flash Posted March 24, 2003 Author Share Posted March 24, 2003 Thanks Tim, I was beginning to start pulling my hair out over here! I tried everything to get those suckers to work. I could see them but no one else could apparently. Thanks again Quote Link to comment Share on other sites More sharing options...
Mudge Posted March 24, 2003 Share Posted March 24, 2003 LOL I can still see it on my computer Because YOU are authenticated, we are not. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.