turbo rearend on N/A 280ZX?

[Guest 280steveX]

i went to the shop to get some inner CV boots for my '83 ZX N/A motor. they gave me some small boots & grease. now after taking the wheel off & sizing up the boots, they are WAY too small. my buddy says the shop just gave me the wrong parts. i go back to exchange & they get the turbo cv boots to see what they look like. low & behold, it's the right 1s.

 

so do i have a turbo differential on my N/A car or what?

 

what is the gearing for the N/A Z & the turbo Z? heard they are 3.77 on 5spds & 4.11 on AUTOs; please correct me.

[SleeperZ]

You have CVs on your ZX n/a? I thought only the turbos had CVs, the n/a had U-joints like the Zs...

 

And unless you have an automatic tranny, you should have an R200, same type of diff as the turbos.

[Mudge]

Turbo is a 3.54 rear.

 

http://www.geocities.com/MotorCity/Garage/6212/diffswap/diffswap.htm

280ZX

79 MT 4 Spd, (3.364) (R180)

79 MT 5 Spd, (3.364) (R180)

79 AT (3.545) (R180)

80 MT (3.545) (R180)

80 AT (3.545) (R180)

81-83 w/o Turbo,MT (3.9) (R200)

81-83 w/o Turbo,AT (3.545) (R180)

81-83 w/Turbo (3.545) (R200)

 

ZX 2+2

79 MT 4 Spd, (3.364) (R200)

79 MT 5 Spd, (3.7) (R200)

80 MT (3.9) (R200)

[Guest cw280z]

my 82 2+2 n/a has cv half shafts, and the p90 head...

[Guest robert_029]

if i have a 81 280zx non turbo, does it mean i don't have to do anything to the rearend to put a LT1 and T56?????