Mikelly Posted August 22, 2003 Share Posted August 22, 2003 I took last evening and welded an old gas door into the door opening, and tonight I went ahead and mixed up some filler and smoothed that out. I then went ahead and removed the frame work for the trunk area from the rear, and put in the filler cap, removing the filler kneck and rear filler that I had put in last year... This is a more traditional in trunk filler style setup. Next, I took some resin and chopped mat fiberglass and filled the hatch latch hole in the whale tail. The next move will be to fill the roof vents and antena hole! The idea is gonna be to smooth the body of the car as mutch as possible. Next will be the exterior door handles and locks. The drip rails are already removed and I've cleaned them up. I need to spot weld them and fill them. I'd like to thank Doug Carrow for coming up to my house (1.5 hours! ) several times to assist me in working on this and teaching me more about body work and the importance of good products when doing body work! Mike Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted August 22, 2003 Share Posted August 22, 2003 sounds like it will be as smooth as a babys bottom mike try to post somepics for it sometime i would be curious to see your mods Quote Link to comment Share on other sites More sharing options...
Guest 240hybrid Posted August 24, 2003 Share Posted August 24, 2003 Are you going to get rid of the rear bumper and corner lights also?? Quote Link to comment Share on other sites More sharing options...
Synlubes Posted August 25, 2003 Share Posted August 25, 2003 More to come Mike, after your deadline. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.