Synlubes Posted November 18, 2003 Share Posted November 18, 2003 I have some non vented Toyota 4x4 calipers that I had thought about making some spacers to allow me to run these over some vented rotors. My thinking is: These will be used in the rear. The wieght of the calipers (in rear) is not a big concern to me. I will be running some larger rotors and larger lighter calipers up front. I have used these calipers up front and think they are pretty good, so (I`m guessing) they should work well in the rear. I welcome others thoughts on this idea. I should mention that I already have an ajustable pro valve in the car now. And that the car is "street legal" but is used for track events (very little street). Quote Link to comment Share on other sites More sharing options...
JMortensen Posted November 18, 2003 Share Posted November 18, 2003 Too big. You can run an adjustable prop valve to try and fix, but you may want to just start with a smaller caliper and have that much less unsprung weight. I think Terry (BlueOvalZ) is using Toyota cressida rear calipers or something like that, he would definitely have some good advice for you. Jon Quote Link to comment Share on other sites More sharing options...
Synlubes Posted November 20, 2003 Author Share Posted November 20, 2003 * bump * Any others care to comment ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.