garry Posted December 14, 2003 Share Posted December 14, 2003 can anyone show me some photos of the engine mounts on a v8 chev in a 260z regards garry Quote Link to comment Share on other sites More sharing options...
Guest kc6wfs Posted December 14, 2003 Share Posted December 14, 2003 Hi Gary, Here are mine from a 73 240Z . Stock GM mounts. You can find more at http://www.nitrophotos.com/newv8pics.html Dave Quote Link to comment Share on other sites More sharing options...
fastzcars Posted December 15, 2003 Share Posted December 15, 2003 Hope that helps. Quote Link to comment Share on other sites More sharing options...
fastzcars Posted December 15, 2003 Share Posted December 15, 2003 Let's try that again? Quote Link to comment Share on other sites More sharing options...
garry Posted December 15, 2003 Author Share Posted December 15, 2003 can any one tell me dose the motor side square or lean to one side regards garry Quote Link to comment Share on other sites More sharing options...
Corzette Posted December 15, 2003 Share Posted December 15, 2003 Click on my site below, there are many pics on most things there... CZ Quote Link to comment Share on other sites More sharing options...
Tim240z Posted December 15, 2003 Share Posted December 15, 2003 can any one tell me dose the motor side square or lean to one side regards garry It should sit level and be slightly offset to the pasenger side. If your motor is leaning, you may have the spacer plates on the wrong side...I did that too when I was a 'rookie'. The larger (thicker) spacer goes on the driver's side as is shown by the picture above. Tim Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.