Guest 81na ZX Posted March 19, 2004 Share Posted March 19, 2004 A friend of mine is building a Hybrid 510, and he's looking at using a R180 axel for the drivers side. So if anyone can get me some measurements, it would be great. He needs total axel length. and length from the inner flange to outer cup/cv joint. Quote Link to comment Share on other sites More sharing options...
73BOTIZ Posted March 19, 2004 Share Posted March 19, 2004 Here are some dimensions for you. Overall from inner flange to outside of threads = 6" Inner flange to the beginning of the splines = 3-3/4" Inner flange to the end of the splines = 5-1/8" I used the axles with turbo companion flanges and cv axles, before I switched to 280Z axles,and I don't have any stock R180 companion flanges to measure for you. Hope this helps, Mike D Quote Link to comment Share on other sites More sharing options...
JMortensen Posted March 19, 2004 Share Posted March 19, 2004 I am 99% sure that I gave a 510 buddy an old stub axle out of a Z and he was able to use it in a 510. I think they are exactly the same. Jon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.