lilj Posted October 5, 2004 Share Posted October 5, 2004 I'm not sure where to post this, and I'm also going to post this in the classifieds but I thought I'd make a place so that people could post up if they wanted anything off of the car. Basically I found out how bad the unibody damage really was, so yeah. its going to the j-yard. The following parts are the things I can think of off hand, If you're interested e-mail/aim/msn me or post here. If this thread shouldn't be here, sorry.. move it.. delete it.. whatever =) NEW LIST FARTHER DOWN anything else feel free to ask about, and i'll let you know the condition, etc.. i can also take pictures of whatever. Also, I'm in the houston area.. so anything big I'd prefer if it could be picked up. thanks, -jon Quote Link to comment Share on other sites More sharing options...
dilop Posted October 5, 2004 Share Posted October 5, 2004 Jon, Would those Tokico Hp work on my 280zx 2+2? Do you know if door's windows are the same for the coupe and 2+2? Is the Fuel rail for barbed injectors? How should I pay you if I want some of your car's part's? Please be advice than I out of the States but you could send the part to my address in Miami. BTW, Is the 280Zx of the photo the one you are parting out? How much for the main light covers, hatch struts ? Regards, Diego Quote Link to comment Share on other sites More sharing options...
lilj Posted October 5, 2004 Author Share Posted October 5, 2004 I don't know off hand if the windows would fit, you might ask around on the forums. The hatch struts are shot =( I've been looking for some myself! lol. The tokico HPs will NOT work for a 2+2, they're for the coupe model. However, I think the fronts would work, but I wouldn't want to split them up anyway. The rail is for barbed injectors, yes. Yes, the car in the picture is what is being parted out. You can also see pictures of misc stuff in the link below the picture. Also, the main light covers are semi cracked.. not in very good condition. If you wanted something (lol at this point I don't see how =P), You could pay by paypal, money order, or check. Any other questions feel free to ask. -Jon Quote Link to comment Share on other sites More sharing options...
80LS1T Posted October 5, 2004 Share Posted October 5, 2004 What color is the interior? I really need the T-top holders that go on the outside of the car on the instide edge of the t-top. They are the chrome peices on outside. How much do you want and what kind of condition are they in? I'll take that center console off your hands if you include the shift boot(outer boot) Guy Quote Link to comment Share on other sites More sharing options...
lilj Posted October 6, 2004 Author Share Posted October 6, 2004 the color of the interior is black.. t-top holders.. is that what you're talking about? the edge of the t-top? I can take some pictures tommorow if you like, one of the t-tops is cracked, and one doesn't have any interior piece on it. They're ghetto.. but I'd sell both t-tops for 10 bucks + shipping lol And yes, I'd include the shifter boot.. one less thing that goes in the trash haha =P Thanks, -Jon Quote Link to comment Share on other sites More sharing options...
Dead Roman Posted October 6, 2004 Share Posted October 6, 2004 dibs on the tranny/flywheel/clutch Quote Link to comment Share on other sites More sharing options...
zeeboost Posted October 6, 2004 Share Posted October 6, 2004 How’s your headliner and rear quarter panels? If they’re still in decent shape, how much do you want for them? I call first dibs on ‘em. Quote Link to comment Share on other sites More sharing options...
lilj Posted October 6, 2004 Author Share Posted October 6, 2004 headliner is in horrible condition.. quarter panels..? you mean the actual metal? or the interior pieces? =P lol.. when it comes down to it my car really was a piece of shit! =) -jon Quote Link to comment Share on other sites More sharing options...
zeeboost Posted October 6, 2004 Share Posted October 6, 2004 I’m referring to the interior rear quarter panels, as they have proved to be a PITA to find any of the black ones in good shape. Thanks though Quote Link to comment Share on other sites More sharing options...
lilj Posted October 6, 2004 Author Share Posted October 6, 2004 They aren't in too bad a shape, I think one of them has a small crack in the bottom where it sits on the floor, but other than that they're in fairly good condition.. I can take some pictures if you like =) gotta take some of the clutch/flywheel anyway, so ill post them up @ http://www.untraceable.org/z/new/ -- should be up in an hour. Quote Link to comment Share on other sites More sharing options...
Guest bastaad525 Posted October 6, 2004 Share Posted October 6, 2004 Please tell me you are in SoCal... I'm very interested in that radiator, does it bolt in w/o drilling or anything? I'm running a stock '81 ZX radiator in my car right now, but it runs a bit hot on hot days when I'm boosting a lot, would love to get an aluminum radiator but only if it is a 100% bolt in replacement. Also, does it have the stock inlet and outlet locations? If you're not in SoCal, any idea how much it would cost to ship? Shoot me a PM. Quote Link to comment Share on other sites More sharing options...
lilj Posted October 6, 2004 Author Share Posted October 6, 2004 its more of a v8 radiator than anything else.. you cannot run the stock fan, or even a regular electric fan with the L6. basically you have to have a slimline fan.. and on top of that, it is NOT bolt in, it requires fabrication and is a chevy style universal 26x19 alum radiator. thanks, -jon ps. sorry about pics, it'll have to wait until later.. too busy =( Quote Link to comment Share on other sites More sharing options...
ZXR_KiD Posted October 6, 2004 Share Posted October 6, 2004 any chance you could get out the good ole Saws All and hack the lft rear quarter off with a reasonable price? ... I just need the outer metal not the internal... my ZXR has a nasty umm, lets use ding to describe it... Quote Link to comment Share on other sites More sharing options...
lilj Posted October 6, 2004 Author Share Posted October 6, 2004 that all depends on your view of a reasonable price anythings possible.. it just comes down to if i have the time and im not being lazy. Quote Link to comment Share on other sites More sharing options...
lilj Posted October 6, 2004 Author Share Posted October 6, 2004 fidanza 215mm (NON-TURBO) alum flywheel - $100 spec stage 3 clutch (215mm n/t) - $100 280zx coupe tokico hp shocks (nib) - $100 300zx (z31) seats - $100 jsk billet fuel rail w/gauge - $70 non-turbo distributor 2 - $50 set of non-turbo injectors (reman) - $50 l28e longblock - $50 ecu & harness (n/t) - $50 t-tops (drivers side cracked) - $20 non-turbo distributor 1 - $20 jsk billet throttlebody spacer - $25 set of metal injector bases - $20 center console w/power mirror - $10 more stuff to be listed.. just as SOON as i get the car cleaned out lol! =P Thanks, -Jon Quote Link to comment Share on other sites More sharing options...
lilj Posted October 6, 2004 Author Share Posted October 6, 2004 some images of the major things Quote Link to comment Share on other sites More sharing options...
Guest 240ZZ4 Posted October 6, 2004 Share Posted October 6, 2004 Where are you locatred and how much do you want for it..? and radiator! Quote Link to comment Share on other sites More sharing options...
lilj Posted October 6, 2004 Author Share Posted October 6, 2004 want for what? SOLD radiator n42 intake manifold transmission Thanks, -Jon Quote Link to comment Share on other sites More sharing options...
80LS1T Posted October 7, 2004 Share Posted October 7, 2004 I think you painted over the parts that I am looking for, for the T-tops. What kind of condition are the B-pillar trim pieces in? These peices... Also do you have the screw caps that go into the panel right behind the seats thats above your head? There are 2 in the panel. I could also use the ones that go into the rear panels(not sure how many there are but I could use them all! LOL) If you cant sell the t-tops then I just need the panesl that go on them on the interior side. The ones that are by the handles to pull them off. And the unlock knobs. I also need trim pieces that go around the opening but from your pics it looks like they are "broken" The holes where the locking pins go look like they are missing the ring around the edge? Guy Quote Link to comment Share on other sites More sharing options...
Guest bastaad525 Posted October 7, 2004 Share Posted October 7, 2004 Damn... too bad about that radiator... coulda saved me $200-300 Ah well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.