BobsZTwins Posted February 5, 2003 Share Posted February 5, 2003 I've got a 260Z with a Chevy 350 bolted to a T10. I'd like to upgrade to a WC T5. The block is a 4 bolt main with a split rear main seal ('69-'80 vintage casting). Any known problems with bolt-up, clutch, etc.? Thanks for any advice! Quote Link to comment Share on other sites More sharing options...
Heavy Z Posted February 5, 2003 Share Posted February 5, 2003 Yes it'll work...do a search here and in drivetrain for WC T5 and you'll find the info you want. TBroZ was asking similar questions recently so you can also check out his posts. Good luck Quote Link to comment Share on other sites More sharing options...
Mike C Posted February 5, 2003 Share Posted February 5, 2003 You are stuck with a 153 tooth flywheel and 10.5" clutch, but it will work. Lots of stuff on T5 in either this board or driveline board so search and see what you uncover. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.