cyrus Posted November 8, 2004 Share Posted November 8, 2004 I need Cobra wheel info Please. I searched but could not find it. Someone had a blue(?) z with big cobra rims, coil overs, 245's but wanted 255's but no flares. I need the rim info as well as any other info. Thanks!!! Quote Link to comment Share on other sites More sharing options...
Mikelly Posted November 8, 2004 Share Posted November 8, 2004 You can pretty much run any of the cobra knockoffs as long as you get some wheel spacers... If you go to http://photos.yahoo.com/dat74z you can see pics of my grey primered Z with stock Mustang wheels (2002 model 17X8 inches) with 255s in the rear under stock fenders. I used 1/2 inch spacer to get them to clear my coil overs. I also had the cobra Rs (Sold them with my wife's Mustang) on the Z with no fitment issues, as they were the same backspacing but an inch wider... Mike 8) Quote Link to comment Share on other sites More sharing options...
cyrus Posted November 8, 2004 Author Share Posted November 8, 2004 Actually...he had no spacers...(i think) Quote Link to comment Share on other sites More sharing options...
Mikelly Posted November 8, 2004 Share Posted November 8, 2004 Not sure about his, although I remember the pics and his wheels looked very similar to mine, but for the stock Mustang offset you will need spacers for the rear wheels... They will sit inboard to much and interfere with the strut assembly. Did you do to my above link and see the fitment of the 255s? Mike 8) Quote Link to comment Share on other sites More sharing options...
cyrus Posted November 9, 2004 Author Share Posted November 9, 2004 Ok. I am doing something different on the rear. I just neeed the rim specs for the front to work with no spacers. Thanks. Quote Link to comment Share on other sites More sharing options...
Mikelly Posted November 9, 2004 Share Posted November 9, 2004 They'll fit with no issue in the front... Mike 8) Quote Link to comment Share on other sites More sharing options...
cyrus Posted November 11, 2004 Author Share Posted November 11, 2004 i need the width, dia , and offset as well as a picture or place to buy. thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.