Guest Lil_mack_69 Posted April 11, 2005 Share Posted April 11, 2005 ok so i have a vg30dett and want to know if anybody knows if i can put a 6 speed in my car. i saw a post on a another site that u can put a 350 6speed trans in and it will bolt right to the engine but they didnt give any more info. so any ideas please help give all the info i need. thanks Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted April 11, 2005 Share Posted April 11, 2005 ok so i have a vg30dett and want to know if anybody knows if i can put a 6 speed in my car. i saw a post on a another site that u can put a 350 6speed trans in and it will bolt right to the engine but they didnt give any more info. so any ideas please help give all the info i need. thanks This is what you need to do it.... I have the biggest part in the pic if you need one, the other stuff you'll have to do some home work on. If you want the perfect 2004 Z33 6 spd, send me a PM.... Quote Link to comment Share on other sites More sharing options...
Guest Lil_mack_69 Posted April 11, 2005 Share Posted April 11, 2005 do i need to change the diff. in the rear or can it stay the same? or wat other type of work needs to be done or is it a simple install?? Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted April 11, 2005 Share Posted April 11, 2005 do i need to change the diff. in the rear or can it stay the same? or wat other type of work needs to be done or is it a simple install?? I'm not sure but if you go to that shown website (on the printing on pic) you may find some info on that... Quote Link to comment Share on other sites More sharing options...
Guest Lil_mack_69 Posted April 12, 2005 Share Posted April 12, 2005 well i did some more reserch and ppl said that the 350 trans wont bolt up and u have to replace the hole rear end. any ideas ??? Quote Link to comment Share on other sites More sharing options...
Thaniel Posted April 21, 2005 Share Posted April 21, 2005 well i did some more reserch and ppl said that the 350 trans wont bolt up and u have to replace the hole rear end. any ideas ??? The bolt pattern for the trans is different. An adapter would have to be made or purchased. I believe the eariler post mentioned that. I don't see why you would have to change the diff. I have a 350z trans working with a Rx-7 diff. With a custom driveshaft any trans can mate to any diff. Pretty much. Problem I ran into was the output spline on the 350z trans was not a standard size and no one had aftermarket slip yokes. At least not a year ago. Also 350z trans tend to have a 3rd gear grind. The one I bought had 527 miles on it and grinds horribly going into 3rd. Shifting up or down. I have a different 350z trans on my garage floor. But haven't had a chance to try it out. I hope it is better. Quote Link to comment Share on other sites More sharing options...
RedBeauty84ZX Posted April 22, 2005 Share Posted April 22, 2005 (edited) Why wouldn't you just stick with the Z32's transmission? Edited May 20, 2013 by RedBeauty84ZX Quote Link to comment Share on other sites More sharing options...
Guest Lil_mack_69 Posted May 22, 2005 Share Posted May 22, 2005 well im doen some thinking and i havent made my mind up yet. its just the thought of a hole extra gear of power hehe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.