Guest 73Turbo240z Posted April 21, 2005 Share Posted April 21, 2005 Alright i need to snag some new flywheel bolts for my new motor, i don't wanna just run down to home depot and start digging cause well frankly i'm a little attached to my feet, and would just as soon not lose them if the flywheel came tear assing off... So, that being said, where can i get some flywheel bolts that are decent, does ARP or another "upgrade fastener" maker have an offering, or do i need to go bend over for nissan and hope for the best? Quote Link to comment Share on other sites More sharing options...
Drax240z Posted April 21, 2005 Share Posted April 21, 2005 I used new stock bolts. Still have both feet. Seriously though, you aren't going to break a flywheel bolt if it's properly torqued and in good condition. I would recommend NEW ones. Make sure you get MT bolts and not AT bolts though, the MT ones are a fair bit longer. Quote Link to comment Share on other sites More sharing options...
Guest 73Turbo240z Posted April 21, 2005 Share Posted April 21, 2005 I used new stock bolts. Still have both feet. Seriously though, you aren't going to break a flywheel bolt if it's properly torqued and in good condition. I would recommend NEW ones. Make sure you get MT bolts and not AT bolts though, the MT ones are a fair bit longer. where did you acquire these? Quote Link to comment Share on other sites More sharing options...
jbc3 Posted April 21, 2005 Share Posted April 21, 2005 ARP Bolts! Quote Link to comment Share on other sites More sharing options...
johnc Posted April 21, 2005 Share Posted April 21, 2005 Get the stock Nissan Turbo flywheel bolts. Just tell the Nissan parts guy you need the flywheel bolts for a 1982 or 1983 280ZX Turbo manual. Quote Link to comment Share on other sites More sharing options...
gramercyjam Posted April 21, 2005 Share Posted April 21, 2005 If you really need them ARP kit is 203-2801 (8 Toyota bolts) I needed them for my setup. The heads are too tall on the stock bolts for my setup and it needs the short 12 point heads on the ARP bolts. Quote Link to comment Share on other sites More sharing options...
Drax240z Posted April 21, 2005 Share Posted April 21, 2005 where did you acquire these? Haha sorry. At Nissan. Quote Link to comment Share on other sites More sharing options...
Guest 73Turbo240z Posted April 21, 2005 Share Posted April 21, 2005 If you really need them ARP kit is 203-2801 (8 Toyota bolts) I needed them for my setup. The heads are too tall on the stock bolts for my setup and it needs the short 12 point heads on the ARP bolts. the thread pitch and bolt diameter were the same for your L28 setup as this toyota kit? Quote Link to comment Share on other sites More sharing options...
gramercyjam Posted April 26, 2005 Share Posted April 26, 2005 yes. Quote Link to comment Share on other sites More sharing options...
teamz Posted April 27, 2005 Share Posted April 27, 2005 If you really need them ARP kit is 203-2801 (8 Toyota bolts) I needed them for my setup. The heads are too tall on the stock bolts for my setup and it needs the short 12 point heads on the ARP bolts. Are the ARP bolts long enough? I measured my old ones and they measured 1 1/16" (27mm) long and the ARP website say theirs are 1" (25mm) long. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.