Schlasken Posted May 8, 2005 Share Posted May 8, 2005 last summer i bougt a r32 rb26, but know i am about to buy a r32 gts-t skyline with a single turbo rb26 engine in it. it has hks manifold an a to4r turbo if i remember correctly. the plan is to take this engine and put it in my z, and put the r32 engine in the skyline and sell it. but will the turbo fit? i have rick wong mounts. and another issue is that the new engine is a r33 but the one i have is 32, will the wiring harness from the r33 engine work with my r32? the car i`m buying has a mines ecu and original r33 harness if i`m not mistaken. is it enough to get a r32 gtr ecu and put my engine in it? Quote Link to comment Share on other sites More sharing options...
stony Posted May 8, 2005 Share Posted May 8, 2005 My engine has a T88 on a HKS manifold, sits dead center of the strut pillar and hit hard. i will have to end up notching the pillar about a half inch to get the turbo to clear. I think the t04R is alittle bit smaller housing but not sure. with a manual you can put a little less tilt in the motor and get it to clear. Im running an auto tranny and the pan needs to be horizontal so i will be cutting the pillar to get it in there. Sorry cant help you with the wiring i have run nothing but standalones. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.