nienberg.11 Posted November 11, 2005 Share Posted November 11, 2005 I'm sure all of you worry a little when you see how badly rusted the area around your battery is, from all of the corrosive gases it gives off. My battery box actually rusted through in 2 places, which I patched using some sheet steel. To keep it from rusting further, I painted the entire area with a thick coat of fibrous roofing pitch, as shown below. Quote Link to comment Share on other sites More sharing options...
Cruez Posted November 11, 2005 Share Posted November 11, 2005 POR 15 will do the trick also. Quote Link to comment Share on other sites More sharing options...
rudypoochris Posted November 11, 2005 Share Posted November 11, 2005 I used epoxy paint. Quote Link to comment Share on other sites More sharing options...
MusPuppis Posted November 12, 2005 Share Posted November 12, 2005 I used an air chisel to cut out my tray and will be welding in new material. Rust was worse than i thought.. I'll be hitting the whole area with Epoxy primer when Im done as well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.