Jump to content
HybridZ

RB Nissan part numbers


Guest Aguyandaredhead

Recommended Posts

Guest Aguyandaredhead

Anyone have the part numbers for the oil pump seal and rear main seal, I also would like to have the Nissan gasket sealant part number (like for the oil pan) as well.

 

If you have the numbers and or can get me the parts I would really appreciate it.

 

Thanks

Jeff

Link to comment
Share on other sites

I happen to have just gotten both of those seals. Here are the numbers:

 

oil pump seal: 13510-19V00

 

crank seal: 12279-5L310

 

 

As for the oil pan. I don't remember the pan having any gasket at all. Just that sealant glue stuff. It was the same on the SR20 I pulled apart too.

 

Brian

Link to comment
Share on other sites

Guest Aguyandaredhead

Correct, I wanted the Nissan Part number for the sealant, the gray stuff.

 

Thanks for the Other part numbers, Did you get them here in the US or are they a japan only part number?

 

Jeff

Link to comment
Share on other sites

Guest Aguyandaredhead

Thanks buddy.

 

I have it ordered should be here today.

 

I would like the part number for the little half moom seals in the back of the head if you think you can round those up. I think they might cross ref to a USDM part but I am not sure.

 

Thanks

Jeff

Link to comment
Share on other sites

PS. if anyone else wants to know part numbers, my nextdoor neighbour and good friend works for nissan and has got me every part ive needed so far for my RB25DET. I can easily find them out for you.

 

Can you give me the part number for the Exhaust Manifold Gasket (Between Turbo Manifold and Head)

Link to comment
Share on other sites

Thanks buddy.

 

I have it ordered should be here today.

 

I would like the part number for the little half moom seals in the back of the head if you think you can round those up. I think they might cross ref to a USDM part but I am not sure.

 

Thanks

Jeff

 

Funny that, i was installing new cam cover gaskets yesterday after having my head rebuilt and was like hang on!!!! so yeh when i go to order them in the next week or so i will let know.

 

240Z_Master: i will check that for you too

Link to comment
Share on other sites

Funny that' date=' i was installing new cam cover gaskets yesterday after having my head rebuilt and was like hang on!!!! so yeh when i go to order them in the next week or so i will let know.

 

240Z_Master: i will check that for you too[/quote']

 

Any luck on that yet?

Link to comment
Share on other sites

 

I would like the part number for the little half moom seals in the back of the head if you think you can round those up. I think they might cross ref to a USDM part but I am not sure.

 

Thanks

Jeff

 

That info is right here in the RB section.... http://forums.hybridz.org/showthread.php?p=598024#post598024

Link to comment
Share on other sites

Thanks buddy.

 

I have it ordered should be here today.

 

I would like the part number for the little half moom seals in the back of the head if you think you can round those up. I think they might cross ref to a USDM part but I am not sure.

 

Thanks

Jeff

 

Rubber (Half Moon) Plugs - "11051-58S00"

Link to comment
Share on other sites

Again sorry, my life has taken a toll in the last two weeks, physically and mentally exhausted.

 

on an up note though i am getting a copy of the Nissan Fast software, so no need to go into the dealership to get part numbers and spend my valuable lunch break in there searching for a part.

Link to comment
Share on other sites

Again sorry' date=' my life has taken a toll in the last two weeks, physically and mentally exhausted.

 

on an up note though i am getting a copy of the Nissan Fast software, so no need to go into the dealership to get part numbers and spend my valuable lunch break in there searching for a part.[/quote']

 

Yeah I just got a copy of Nissan Fast, it rocks!

Link to comment
Share on other sites

Yeah I just got a copy of Nissan Fast, it rocks!

 

How do I get a copy of that? As I get closer to doing this, I'm left wondering about stock replacment parts. Like oil filters, ect.... I'm also getting a Tranny from a RB25, and JT just told me that a few of the sensors are busted. Z32 sensors should bolt in, but what about other things that I would need to replace over the years, that will be stock parts. It would be nice to know that there are a few parts in the US that I can use.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...