VinhZXT Posted January 25, 2006 Share Posted January 25, 2006 Have anyone have any experience with this seller? http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=8030831072#ebayphotohosting I was curious why their is so cheap. Thanks for any info. PS. I already know Ross offer them also. Quote Link to comment Share on other sites More sharing options...
Cruez Posted January 25, 2006 Share Posted January 25, 2006 Check the search... this was brought up a few weeks ago... Didn't look promising.. Quote Link to comment Share on other sites More sharing options...
cobraz240z Posted January 25, 2006 Share Posted January 25, 2006 you could make your own kit if you want i did it and got everything from A-1 racing it will cost about $300 and you have more spring rates to choose from Quote Link to comment Share on other sites More sharing options...
waynekarnes Posted January 25, 2006 Share Posted January 25, 2006 take a look at this site http://www.geocities.com/bry593/coilover/coilover.htm Quote Link to comment Share on other sites More sharing options...
Here comes trouble Posted January 25, 2006 Share Posted January 25, 2006 Vinh... if the project is a 280 Z with 2.170 strut tubes...you will have ahard time finding strut sleeves..........................these eBay springs are odd and maybe based on two seperate springs. From the picture I cannot even tell if there are adjusting sleeves. here is a thread on a source for the 280 Z adjustable coilover sleeve http://forums.hybridz.org/showthread.php?p=598107#post598107 Quote Link to comment Share on other sites More sharing options...
VinhZXT Posted January 25, 2006 Author Share Posted January 25, 2006 Thanks for the replies guys. I've search this site briefly before posting this but didn't find the answer. Right after I posted it I went back and did more searching and found the info about the A1racing site. HCTrouble, my project car is a 280Z and I found that info about the 2.170 strut tube also. I believe someone made a sticky about that thread but I didn't see it on the top of the page. Hopefully I have time to check out VRJoe's setup this weekend and get more info from him. Thanks again guys. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.