260DET Posted February 19, 2006 Share Posted February 19, 2006 For anyone who would like to know what the front and rear suspension setups look like. Note that the PS rack is mounted behind the Xmember, on the rear no hicas, two bolt R200 diff cover. Off a AU spec SR20 engined 200SX, RHD of course. This lot will be going on Project S130, when the subject arrives from Japan. Quote Link to comment Share on other sites More sharing options...
dj paul Posted February 19, 2006 Share Posted February 19, 2006 whats the width of the front? s14s are much wider cars arent they? i like that front setup, im sure i could get it done on my 240z shortening and such. im already doing the back swap with a clsd. =) Quote Link to comment Share on other sites More sharing options...
thehelix112 Posted February 20, 2006 Share Posted February 20, 2006 Cheater. Dave Quote Link to comment Share on other sites More sharing options...
260DET Posted February 20, 2006 Author Share Posted February 20, 2006 Impossible to measure the front hub to hub distance accurately dj with the struts flopping around but somewhere around 1550mm. Hehe Dave Quote Link to comment Share on other sites More sharing options...
260DET Posted February 21, 2006 Author Share Posted February 21, 2006 The rear hub to hub can be accurately measured though, 1527mm. Quote Link to comment Share on other sites More sharing options...
Hypertek Posted February 21, 2006 Share Posted February 21, 2006 Good that is a non-hicas *like 4wheel steering* subframe... I know the JDM cars had it as an option in japan, but the USDM 240sx s14 never came with it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.