Guest iskone Posted February 24, 2006 Share Posted February 24, 2006 I know lots of body parts can be swapped and I also know the front sturts are different from 240-280. All the searching I did didn't turn up anything. I need to cut up a Z from left of the strut tower to half of the core support area to put in my 240. Can I use a 280 as a donor? Isk Quote Link to comment Share on other sites More sharing options...
evildky Posted February 24, 2006 Share Posted February 24, 2006 core support hangs lower in the 280, and the 280 also has an extra plate just above the frame rails near the core support, you can make it fit with a little more work than doing 240 parts Quote Link to comment Share on other sites More sharing options...
Guest iskone Posted February 24, 2006 Share Posted February 24, 2006 Well my supports are going to be staying in, they are not damaged but I need all the sheet that goes inbetween them. I don't know if that will make difference, I'll have to look. I'd rather just go all 240 of course. Isk Quote Link to comment Share on other sites More sharing options...
SBC_400 Posted February 24, 2006 Share Posted February 24, 2006 I have some inner fronts from a 260, frame railes and all, but no core support Quote Link to comment Share on other sites More sharing options...
niceguy678us Posted February 24, 2006 Share Posted February 24, 2006 SBC 400 you have a private message. Quote Link to comment Share on other sites More sharing options...
Guest iskone Posted February 24, 2006 Share Posted February 24, 2006 SBC: What kind of shape are they in? What do you want for em'? Niceguy: You trying to hijack my thread/parts? That's not cool. If I'm mistaken sorry to be a Ahole. Isk Quote Link to comment Share on other sites More sharing options...
280Zone Posted February 25, 2006 Share Posted February 25, 2006 I actaully have a whole 240 parts car. Roof is gone but the rest of the structure is still there. Quote Link to comment Share on other sites More sharing options...
vashonz Posted February 25, 2006 Share Posted February 25, 2006 Just saw this thread, I have a couple 240z parts cars in my yard. From what I remember the area you describe is in good shape. We were just going to junk the car. If you want to come over and cut anything off you're welcome to it. (bring sawzall blades, we have a saw you can use). I'll pm you with my phone # Quote Link to comment Share on other sites More sharing options...
SBC_400 Posted February 27, 2006 Share Posted February 27, 2006 her are shots of the inners before the cross member and the suspension were removed. I still have all the parts, but the fenders were removed to be stored in the shed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.