Jump to content
HybridZ

Thermo wiring


Recommended Posts

Alright Car is 1976 280z

 

Heres the thing i recently did an engine swap and swapped my old intake onto the new engine. (all wiring is the same)

 

but theres one connector that i have no idea where it goes

Its on a single harness the two cables are yellow and green

 

I know one goes into the thermo no idea where the other goes

 

basicly its two wires that merge into a signle holder for them its connected to the egr harness aswell

Link to comment
Share on other sites

I don't remember my car having an egr harness, but in that general area, the next closest thing with an electrical connector (besides an injector of course) would be the idle air control valve. Its the thing with a rubber hose going to the throttle body, and another one that has T on it. The connector goes underneath the hose going to the TB.

 

If thats not it, my next guess would be that you are talking about the coldstart valve, but this is a pretty obvious connection, and It would be hard to miss.

 

Note: the car will run without those wires connected.

Link to comment
Share on other sites

stick a voltmeter into it and see if it has power. If it does... start pulling fuses till it doesn't, that should limit your search considerably if everything is wired stock as you imply it is. but yellow and green makes me think a gauge. most power wires are red and white.

 

-Ed

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...