Jump to content
HybridZ

Is this e-bay turbo junk, or is it any good.


Recommended Posts

I purchased one of those on ebay from a guy who claimed it was used for a few hundred miles. The turbo sure looked clean inside and out. It did have some shaft play. I took it apart to investigate and found that the casting of the center section had a pretty wide crack in it where the bearing floats. This crack could have been caused by lack of oil, but since everything looked pretty sterile, I think the casting may just be poor.

 

One other thing, the "5 bolt pattern" is not the same as the stock unit. It is off by quite a bit.

 

I am toying with the idea of bolting up the cold side to my Nissan T3

Link to comment
Share on other sites

".63 A/R COLD

 

.58 5 BOLT STANDARD HOT SIDE

 

3"INLET DIAMENTER

 

2"OUTLET

 

 

 

.57 COMPRESSOR WHEEL TRIM

 

.60 A/R COMPRESSOR

 

.63 A/R TURBINE

 

57 TRIM"

 

Sounds like the guy is having trouble making up his mind just what the specs are on this turbo.

 

It looks CHEAP to me. I'd rather spend $200 for a Garrett. I won't buy anything that isn't Garrett or AIResearch or HKS (Garrett), actually.

 

Reminds me of the "SSAutoChrome" turbos... the ones that the compressor housing falls off and is apparently GLUED on.

 

 

With that outlet, you still have to buy the bolt up flapper housing, too.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...