HB280ZT Posted July 31, 2006 Share Posted July 31, 2006 Hi All, I am looking for some pictures of an 81 turbo CAS and dampener. I was thinking about using them or atleast the mounting hardware and the dampener in an EDIS-6 setup with my MS unit. So if anyone can help me out thanks! HB280ZT Quote Link to comment Share on other sites More sharing options...
big-phil Posted August 1, 2006 Share Posted August 1, 2006 Wow I looked and looked. I knew I had a pic. Quote Link to comment Share on other sites More sharing options...
NZeder Posted August 1, 2006 Share Posted August 1, 2006 Or you could look in my Gallery Here is the one from my Gallery Quote Link to comment Share on other sites More sharing options...
HB280ZT Posted August 2, 2006 Author Share Posted August 2, 2006 Guys, thanks for the pictures that is what I was looking for. Now can you tell how the dampener works on this setup? Does it have 6 spots on the dampener or just 1? Thanks HB280ZT Quote Link to comment Share on other sites More sharing options...
NZeder Posted August 3, 2006 Share Posted August 3, 2006 Not 6 but 3 - remember 6 cylinder = 120 degree firing order during the total 720 cycle. The CAS in the dizzy or cam (as in the RB/VG stuff) have 6 as the spin at 1/2 crank speed. If you look close enough you can see the second pick/magnett (or whatever they are) on the left just above the oil pump (hard to tell because of the black paint the engine imported put on the pully). I believe the single these CAS units put out is the same as those from the 280ZXT dizzy CAS. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.