Yorgee Posted August 8, 2006 Share Posted August 8, 2006 I came across a pair of camber plates on ebay and was wondering if they would fit on a 240z. http://cgi.ebay.com/ebaymotors/Nissan-240sx-S13-S14-CAMBER-PLATES_W0QQcmdZViewItemQQcategoryZ33581QQihZ010QQitemZ200013039806QQrdZ1 Quote Link to comment Share on other sites More sharing options...
JMortensen Posted August 8, 2006 Share Posted August 8, 2006 That manufacturer (techno toy tuning) makes camber plates for the 240Z. You should ask them directly. The Z has a very small strut tower, so the 240SX may not work. Quote Link to comment Share on other sites More sharing options...
Yorgee Posted August 8, 2006 Author Share Posted August 8, 2006 That manufacturer (techno toy tuning) makes camber plates for the 240Z. You should ask them directly. The Z has a very small strut tower, so the 240SX may not work. Ya I was thinkin about doing that...because they have another set up camber plates but they are the weld on type and I'm a little iffy about the weld i have. But thanks jmortensen...I think I'll just contact techno toy tuning to see if they have any bolt ons or sumthing. Quote Link to comment Share on other sites More sharing options...
OlderThanMe Posted August 9, 2006 Share Posted August 9, 2006 Just have an exhaust shop weld it! Or some offroad shop... both can weld on thinner steel with good exp. I had a muffler shop weld my seat back together before I knew how to weld. They only charged me $15 for 5"-6" of weld...not bad. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.