Guest VooDooR33 Posted August 21, 2006 Share Posted August 21, 2006 wellllllllllll I"m new here and thank god I ran across this site.. it has more useful info about the RB then any other forum.. here goes my story.. so i have an R33 GTS-T with rb25det... I have had pretty good luck finding parts for it.. and I purchased greddy manifold from project nissan back in november... BUT! between relocation and my hectic schedule I misplaced the install manual for the manifold.. I know what you're thinking.. how hard could it be? well.. the acutall hardware install is easy.. but in the messes of coolant lines and vacum lines with everything being relocated on the new manifold, I got lost.. I don't want to take chances so here's my S.O.S if anyone has the install manual and would email a copy I would so greatful for life. I would even pay for it. if you have close up pics of the manifold undeside installed with coolant/vacume lines attached even better... I did a photo shoot with primedia back in late may and they need my tech sheet along with dyno numbers and I've slacking off on it but deadline is approaching fast... so could anyone help me? please? Quote Link to comment Share on other sites More sharing options...
z_cars_rule Posted August 21, 2006 Share Posted August 21, 2006 Check out http://www.skylinesaustralia.com best RB help site i have come across Quote Link to comment Share on other sites More sharing options...
Guest VooDooR33 Posted August 21, 2006 Share Posted August 21, 2006 Thanks for the link! I found few very important pics that i needed.. took me 3 hours of search.. but thanks!!!!!! Quote Link to comment Share on other sites More sharing options...
Z24O Posted August 23, 2006 Share Posted August 23, 2006 ....you could also keep http://www.calaisturbo.com.au in mind for RB performance cheers paul Quote Link to comment Share on other sites More sharing options...
Dramier Posted August 23, 2006 Share Posted August 23, 2006 Wait, so are you in South Texas or not? If so, where exactly? I'm in Lufkin. I'd be stoked just to see somebody else with an RB here. Quote Link to comment Share on other sites More sharing options...
Guest VooDooR33 Posted August 24, 2006 Share Posted August 24, 2006 Wait, so are you in South Texas or not? If so, where exactly? I'm in Lufkin. I'd be stoked just to see somebody else with an RB here. yes I'm near corpus christi texas, wayyyy south. I used to live up north tx, but moved down recently Quote Link to comment Share on other sites More sharing options...
ttarget Posted December 26, 2008 Share Posted December 26, 2008 Hi VOODOOR33, I have same problem that you have, and I still search, if you have a specifikk adress where I can see where the vacum tubes to the intake manifold goes, I will be verry happy. Quote Link to comment Share on other sites More sharing options...
240zrb Posted December 27, 2008 Share Posted December 27, 2008 http://www.greddy.com/img/PHP/products/pdf/1282.pdf Quote Link to comment Share on other sites More sharing options...
Canadianz Posted December 27, 2008 Share Posted December 27, 2008 I posted a link on here to a how-to swap on this very problem. The post which explains how to do the greddy swap was on skylinesaustralia however have a look through the site here and it should be around. Chris Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.