J__ Posted August 22, 2006 Share Posted August 22, 2006 hi guys, so after my datsun is almost complete, me and my buddy has decided to start a new project and part of the hard part is the suspension. the fronts (2 upper, 2lower) cost approx $800, he doesnt want to spend that much so decided to fabricate some himself. its very easy... but just need an "adjustable" endlink. very much like the ones on ross's rear control arms. and like this... anyone knw where to get these? i suggested just using a tap and die set on steel rods but not sure if we can find a tap and die set that big. edit: also is there a "universal" bushing size for the joints? or should we just find watever bushing available then make the housing and the "spindle rod" to fit the bushing? tia Quote Link to comment Share on other sites More sharing options...
OlderThanMe Posted August 22, 2006 Share Posted August 22, 2006 www.A1racing.com http://a1racing.com/index.asp?PageAction=VIEWCATS&Category=263 This is the company that I got my coilover collars from and were very nice with me. Second link is what I think you need. Quote Link to comment Share on other sites More sharing options...
spotfitz Posted August 22, 2006 Share Posted August 22, 2006 From the same site: http://a1racing.com/index.asp?PageAction=VIEWPROD&ProdID=474 Your pic looked to be a standard tie rod end. Quote Link to comment Share on other sites More sharing options...
2126 Posted August 22, 2006 Share Posted August 22, 2006 There is a company named AFCO that has all sorts of chassis goodies.....check out their website! Nice folks to deal with by the way. Quote Link to comment Share on other sites More sharing options...
J__ Posted August 23, 2006 Author Share Posted August 23, 2006 hey awesome! i think the tie rod end is exactly wat im looking for! thnx for the help guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.