Guest zfan Posted August 4, 2001 Share Posted August 4, 2001 Has anyone don a complete upgrade? I want to do the 180r to 200r pumkin,half shafts,disc brakes etc... Has anyone done this mod and is it worth it? Should I just upgrade the 180 to 200 and not worry about including rear brakes. I am currently installing toyota 4 pistons up front and thought why not have 4 wheel discs and trash those puny drums in the rear. Mike Quote Link to comment Share on other sites More sharing options...
Mike C Posted August 5, 2001 Share Posted August 5, 2001 I'm pretty sure the brakes are the same. I did this swap in my car but just used the r200 and the mustache bar. I kept my half shafts and driveshaft. From what I understand about the rear brakes, one of the best, cheapest upgrades is to switch to cast iron drums. Quote Link to comment Share on other sites More sharing options...
blueovalz Posted August 5, 2001 Share Posted August 5, 2001 There is a ton of info on this, so you need to do a "search" on rear disc brakes, CV half shafts, etc. All of the mods you have listed have been done in different ways by many of our members. The answer to your question is a very broad one, and this info will help. Then if you have any specific questions that are not archived, then feel free to ask. Terry Quote Link to comment Share on other sites More sharing options...
Mike C Posted August 5, 2001 Share Posted August 5, 2001 I was under the impression that you were talking about a 280Z and not a ZX. If ZX things are MUCH different. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.