alexideways Posted November 16, 2006 Share Posted November 16, 2006 Hi, anybody have rears sump pan dimentions? Or if you put it side by side with the original one, does it have roughly the same dimentions? I'm asking cause, I need to start mocking up the engin in the bay but I don't have my pan yet so, with the dimentions, I'll either build one out of cardboard or I'll take the original, cut the flange, flip it end to end and tack it back together. Thanks. Quote Link to comment Share on other sites More sharing options...
alexideways Posted November 19, 2006 Author Share Posted November 19, 2006 Anyone???? just whant to know if the rear sump pan look close to the front sump one but inverted, just need something for mock up. Quote Link to comment Share on other sites More sharing options...
alexideways Posted November 19, 2006 Author Share Posted November 19, 2006 Well, I think I found what I needed. i just cut the flange off my sump and braised it on backwards, cut, rotated and rewelded the pickup and bent the windage fins down to clear the crank journals... Quote Link to comment Share on other sites More sharing options...
z_cars_rule Posted November 19, 2006 Share Posted November 19, 2006 mine is almost identical to the front sump version, but reversed. hope it helps 1 Quote Link to comment Share on other sites More sharing options...
Mike Rowe Posted November 22, 2006 Share Posted November 22, 2006 Hi, anybody have rears sump pan dimentions?Thanks. The bowl at the back of the sump pan is as follows: 140mm deep, 190mm wide and 170mm long regards 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.