Guest 280zxt-83 Posted December 6, 2006 Share Posted December 6, 2006 I just replaced my turbo and waiting on a stainless steel braided oil feed line. So I figured I would look into installing my small NPR intercooler. Looking at the engine compartment I could not see how it could be done without removing the following: A/C, engine fan, canister on passinger side. The only other option was to run the turbo output to the rear of the engine across then up forward towards where the canister is now. Does anyone have any help they could share? Quote Link to comment Share on other sites More sharing options...
nismopick Posted December 6, 2006 Share Posted December 6, 2006 Most people run the in & out through the left side of the radiator suppot by the headlight. This is my IC setup: Some people also cut a hole in the rad support by the canister & run a pipe over the fan. There's lots of pics out there.... feel free to SEARCH Quote Link to comment Share on other sites More sharing options...
slownrusty Posted December 6, 2006 Share Posted December 6, 2006 Here is my old set-up, IC is the Isuzu NPR mid size and 2.25" and 2" piping (the new set-up is 2.5" piping and a much larger more efficient IC): Yasin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.