hoov100 Posted March 6, 2007 Share Posted March 6, 2007 so on my way back from vegas im in the gas station filling up, so i walk around to the passenger side and notice that passenger side door filler is about a hair away from falling off, so i took it off and put it in the hatch, so now im at home trying to figure out how to re-install kaminari door fillers on a z32, so any help as to what adhesives would be needed to re-install it would be very nice at the moment.. Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted March 6, 2007 Share Posted March 6, 2007 Can you post some pics? Quote Link to comment Share on other sites More sharing options...
hoov100 Posted March 6, 2007 Author Share Posted March 6, 2007 not till tomorow, all that was holding it on was about 7 little rubber-like balls that looked like they where smushed in between the door and the filler. Quote Link to comment Share on other sites More sharing options...
AK-Z Posted March 6, 2007 Share Posted March 6, 2007 3M double sided adhesive tape. (outdoor) Its 1/32" thick with a clear gel consistency with a red plastic backing. Like $5 at Lowes or Home depot, But I don't like the idea of having a body panel being held on by JUST adhesive. Might want to find a way to screw it in on th e ends , on the lip of the wheel arch somewhere. Quote Link to comment Share on other sites More sharing options...
GOTHALOSISM Posted March 7, 2007 Share Posted March 7, 2007 you should have called me hoov i could have hooked you up while you were here. I have that 3m tape and it works wonders. Quote Link to comment Share on other sites More sharing options...
hoov100 Posted March 7, 2007 Author Share Posted March 7, 2007 you didnt give me your # Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.