Z24O Posted June 3, 2007 Share Posted June 3, 2007 Just did a search,but nothing definitive,I have some 4 bolt Z31 turbo halfshafts that I believe I can use in the R200 CV conversion(need to reverse the bearing carrier) Question is can I use the Z31 companion flanges or is there an issue with bearing or length compatability with the 240Z hub/stub axle?? The splines (25) seem to match on the sample I have so that's one obstacle out the way I know Ross sells the adapters if I get stuck but if I can use OEM parts then I will I have a 280zxt setup for my other 240Z (compliments of Terry) but have a spare pair of Z31t shafts that I may as well use if I can. Thanks guys. Quote Link to comment Share on other sites More sharing options...
Z24O Posted June 8, 2007 Author Share Posted June 8, 2007 so no-one knows if you can use the 25 spline z31 companion flanges with the z31 halfshafts in an r200 into 240z rear suspension Quote Link to comment Share on other sites More sharing options...
joe d. Posted June 8, 2007 Share Posted June 8, 2007 i'll look in to that tomarrow and let you know. it's late here. Quote Link to comment Share on other sites More sharing options...
zcarnut Posted June 8, 2007 Share Posted June 8, 2007 Question is can I use the Z31 companion flanges or is there an issue with bearing or length compatability with the 240Z hub/stub axle?? Here's what I have measured: 240Z and 280ZX stub axle: 25 splines spline outside diameter = 25.8mm 280Z stub axle: 27 splines spline outside diameter = 27.8mm Z31 stub axle: 26 splines spline outside diameter = 27.5mm So, in my opinion, the answer to your question is no. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.