christoc Posted June 29, 2007 Share Posted June 29, 2007 I ordered a fuel rail from Lone Wolf that finally shipped today. It's setup for 14MM injectors, James there suggested that I get Mopar Super 60 injectors. I'm going to try a local dealer tomorrow, but right now it looks like Summit and Jegs are both back ordered for a week or two. What are my other options? I've got a stock L28ET, but putting in a megasquirt and planning on more upgrades in the very near future, so I don't mind running more CC's than I prolly should with my current setup. I've been digging around the forums/search but couldn't find any good answers. Thanks for your advice. Quote Link to comment Share on other sites More sharing options...
spork Posted June 29, 2007 Share Posted June 29, 2007 http://www.fiveomotorsport.com/Injector_Sets.html I can't remember if I gave you this link or if I had been talking to someone else, but they are a good source for fuel injectors and with a little searching you'll find they carry almost everything and at reasonable prices. Quote Link to comment Share on other sites More sharing options...
christoc Posted June 30, 2007 Author Share Posted June 30, 2007 Thanks James, a buddy of mine also directed me there again. We're going to fit some Ford Lightnightning 42lb injectors when the rail arrives on Monday and then I'll quickly place an order from somewhere. Quote Link to comment Share on other sites More sharing options...
Clifton Posted June 30, 2007 Share Posted June 30, 2007 This place has pretty good prices on larger cc injectors. Don't know about what you are looking for though. http://www.racetronix.com Quote Link to comment Share on other sites More sharing options...
datman Posted June 30, 2007 Share Posted June 30, 2007 fiveO gives great value , I got my 650cc 14mm injectors from them for a decent price. Quote Link to comment Share on other sites More sharing options...
christoc Posted July 21, 2007 Author Share Posted July 21, 2007 Alright, so I was installing the rail this evening, using 8AN line and hose. I setup a straight 3/8 NPT to 8AN fitting, but when I went to install the thermostat housing it won't fit with the rail there. I think I can get a 3/8npt to 8an with 45 degree bend to make it work, but before I run off and buy yet another AN fitting I figured I'd ask what others have done? Quote Link to comment Share on other sites More sharing options...
spork Posted July 24, 2007 Share Posted July 24, 2007 a 45, 90 or even 180 should work fine depending on how you route it. Some route it right along the return line from behind the valve cover to help clean things up on the front of the engine. It's all personal preference. Quote Link to comment Share on other sites More sharing options...
christoc Posted July 24, 2007 Author Share Posted July 24, 2007 We ended up going with a 45, thanks James Quote Link to comment Share on other sites More sharing options...
sweetleaf Posted July 24, 2007 Share Posted July 24, 2007 It all depends.. I made my own rail, (I'm sure you could do the same with yours). But I welded in 8AN fittings. directly onto the rail. That way I was able to clear both sides. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.