himself Posted July 1, 2007 Share Posted July 1, 2007 I've been searching for a few hours about what settings I should enter before starting the motor for the first time since I installed the MS-1 3.0 in my car but I've not had much luck at all finding the data I need. What do I enter for the constants and enrichments fields? I found some data like what to enter for the PWM fields and but not much more than that. I don't know if I have low of high impendance injectors, or of it's even or odd fire or how many squirts per cycle and all the other fields are supposed to be. The motor is a stock '82 turbo. Quote Link to comment Share on other sites More sharing options...
Matt Cramer Posted July 2, 2007 Share Posted July 2, 2007 Take a look at the map sharing thread - you'll see a lot of base settings there. One for an engine with the same injectors as yours ought to make a good jumping-off point. Quote Link to comment Share on other sites More sharing options...
Brad-ManQ45 Posted July 4, 2007 Share Posted July 4, 2007 If your engine is using the stock injectors, then you have low impedance injectors and will need a resistor pack, since the resistors are in the stock ECU as opposed to the '81ZXT. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.