hughdogz Posted September 12, 2007 Share Posted September 12, 2007 I'm installing a Weber TB and the ball diameter for the ball and socket linkage on the new TB is a tiny bit smaller than the OEM one. Only about 1/64" smaller but it is just enough that the socket isn't very secure. The one on the Weber is threaded, but the OEM is pressed-in so I can't really swap them. Is this a common part that my local parts place would have or do I need to go to Weber or maybe Nissan for a new linkage piece? Thanks for any advice, -Hugh Quote Link to comment Share on other sites More sharing options...
zcarnut Posted September 12, 2007 Share Posted September 12, 2007 I had the same problem with a Weber TB. I replaced the linkage arm with a new Nissan one and I also replaced the ball with one from Pierce Manifolds, part #700.123 (8mm Ball Stud). http://www.piercemanifolds.com/linkage.htm 1 Quote Link to comment Share on other sites More sharing options...
hughdogz Posted September 12, 2007 Author Share Posted September 12, 2007 Excellent!! Thanks Zcarnut. I apprecate the link too! You guys are the best. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.